FUTURE NDT TRAINING PROCEDURE:

  1. M/s FUTURE NDT will provide ASNT Level II training as per SNT- TC- 1A standards of American Society of Non-Destructive Testing.
  2. M/s FUTURE NDT will provide QA/QC training as per company’s requirement which was required to get Job in QA/QC field.
  3. The schedule for ASNT Level II & QA/QC Training are as follows:

S. No

Course Offered

Course Duration.

1.

ASNT Level II Training.

a)     Liquid Penetrant Testing.

b)     Magnetic Particle Testing.

c)     Radiography Testing.

d)     Ultrasonic Testing.

e)     Radiography Test Film Interpretation

f)      Visual Testing.

 

16 Hours.

20 Hours.

80 Hours.

80 Hours.

20 Hours.

20 Hours.

2.

QA/QC Training.

a)     Welding Defectology.

b)     Basic Welding Technology.

c)     ASME Section- IX.

 

6 Hours.

6 Hours.

6 Hours.

3.

Industrial Visit.

1 Or 2 Days.

 

  1. ASNT Level II Training as per SNT- TC- 1A- Editions of American Society of Non- Destructive Testing.
  2. 30 Days classes by both Theoretical & Practical approach.
  3. 2 Days Industrial Visits for RT Lab.
  4. Live Projects on industrial applications.
  5. Presentations on each & every method by students on every weekend.
  6. Career guidance will be given to candidates.
  7. Technical, Soft skills & organization behavior training also will be given.
NDT Institutes in Vijayawada
NDT Institute in Hyderabad
NDT Course in Hyderabad
NDT Training in Vizag

FUTURE NDT TRAINING SCHEDULE

ASNT Level II

Method

Topics to be covered

 

Introduction Class

Welding

Welding Types, welding defects, welding positions

Basics

Codes and standards, destructive testing, Non-destructive testing, heat treatments, importance of NDT, Roles & responsibilities.

LPT

LPT Basics, ADV, Dis Adv., Applications, LPT fundamentals, Types of Chemicals, Steps involved in performing LPT.

Description About Chemicals used in LPT, Penetrant, Developer, Remover.

Types of LPT Testing’s, Steps involved in different Testing’s, LPT Lab, Codes & Standards Report Writing.

MPT

MPT Basics, ADV, Dis Adv., Applications, MPT Basics (Magnetic Field, Types of magnetic Material, properties of Magnetic lines of force, Hysteresis Loops)

MPT Basics ( Electricity & Magnetism, Magnetizing Methods,  Demagnetization,  Measuring Magnetic Field,)

Types of Magnetic Particles (Dry, Wet, Fluorescent), Steps involved in performing Dry, Wet, Fluorescent.

MPT Lab, Defects Identification, Codes & Standards, Report Writing.

RT &

RTFI

Introduction (History), ADV, Dis ADV, Applications, Fundamental properties of matter.

Radioactive materials, Types of Radiation

Biological effects of Radiation, Radiological safety principles, Radiation Detection.

Exposure Devices and radiation services, Basic principles of Radiography, Radiographs

Radiographic Image Quality, Film Handling, Loading, Processing & Storage, Exposure Techniques.

RTFI.

UT

Basics in UT, Adv., Dis- Adv., Applications, Basic Definitions, Types of Sounds, Modes of Sound Energy, Sound Wave Velocities in Diff Materials.

UT Principle, Snell’s Law, Critical Angles, Near Field, Far Field, UT Working Principle.

Probe construction, Types of probes, Differences between Probes, Couplets, Cables & Connectors, Types of UT Testing’s and Types of Scans.

Standard Blocks (V1, V2), Reference Blocks (Notch, SDH, Edge), V1 block Calibration, Lab, Report Writing.

V2 Block Calibration, Types of drawing DAC curve, Formulae, Seizing Methods, Lab.

UT Lab Extra.

UT Lab Extra, Report Writing, Codes & Standards.

VT

INTRODUCTION, APPLICATIONS, ADVANTAGES, DEFECTS FIND OUT, WELDING INPSECTION

 

QA/QC CLASS SCHEDULE

METHOD

TOPICS TO BE COVERED

DESTRUCTIVE TESTING

INTRODUCTION OF DESTRUCTIVE TESTING, TYPES OF HARDNESS TEST, IMPACT TESTING, BEND TEST.

INSPECTION TECHNIQUES

TYPES OF INSPECTION TECHNIQUES, JOB AND RESPONSIBLITIES OF QUALITY CONTROL AND QUALITY ASSURANCE ENGINEER 

 

WELDING

 

TYPES OF WELD JOINTS, PARTS OF WELD JOINTS, TYPES OF WELDINGS.

WELD POSITIONS, WELDING SYMBOLS, FILLET WELDING POSITIONS, PLATE WITH FILLET, PIPE WITH GROOVE, PIPE WITH FILLET.

ELECTRODE IDENTIFICATION & CHEMICAL COMPOSITION

MATERIALS ANALYSIS

 

MATERIALS & MTC REVIEW, CLASSIFICATION OF MATERIALS, ADVANCED MATERIALS USED IN INDUSTRIES, METALLURGY PROCESS.

SPECIFIC AND NON SPECIFIC INSPECTION & MATERIAL TEST CERTIFICATE REVIEW.

CODES AND STANDARDS

DIFFERENT TYPES OF ASME CODES, SECTIONS, AWS CODES, ASME PIPING STANDARDS & ISO 9001:2008 REQUIREMENTS

DOCUMENTATION

TYPES OF INSPECTION REPORTS AND JOB-RELATED DOCUMENTS.

DRAWING INTERPRETATION

ISOMETERIC DRAWINGS, TYPES OF PROJECTIONS AND DRAWING INTERPRETATION.

HEAT TREATMENT

BASIC, TYPES OF OWEN, PWHT EQUIPMENT

PROOF TESTING

PRESSURE AND NON-PRESSURE TESTING, HYDROSTATIC TESTING, PNEUMATIC TESTING & VACCUM TESTING.

 

PIPING

BASIC PROPERTIES OF CONVEYOR FLUIDS, DESIGNATION OF PIPES, PIPE FITTING, FLANGES.

GASKETS, TYPES OF VALVES AND PIPE SUPPORTS.